|
TTL / CMOS Design Considerations
On screen animations.
Switch inputs on and off and see the result.
This package is combined with CNC Digital Design on one CD
Beginning digital electronics?
This package will answer most of your questions - and more!
The following on screen INTERACTIVE simulations are provided:-
1. Simple gates-AND OR NAND NOR INVERT EOR
2. Opto Isolator-protect your system from voltage dangers on any board you make
3. Transistor-wiring an NPN transistor as a switch
4. Debounce a changeover switch
5. Debounce a make and break switch
6. Vary the speed of an oscillator
7. Single and cascaded Binary counter
8. Single and cascaded UP/Down Binary and Decade counters
9. Bilateral switches
10. Decoders-1 of 16 and BCD to 7 segment
11. Shift register
12. Flip Flops-JK and D type
These interactive animations give a hands on method of learning how to deal with the integrated circuits.
It comes with a Word™ document that reinforces the above topics
and also deals with different switches, power supply, noise, inputs, outputs, high, low,
open collector, hold down, pull up, fan in, fan out, sinking, sourcing, Schmitt trigger, floating, race hazards, unused gates, debouncing, leading edge, trailing edge, synchronous, asynchronous, decoupling, regulators and transistor interfaces.
The sections in the document on cascading and debouncing fully explain the interactive work on the CD.
There is also a reference section on transistor and capacitor colour coding
The following documents are included:-
1. TTL Pinout documents.
diagrams of 86 ICs in the 74 series TTL
2. CMOS Pinout
diagrams of 59 ICs in the 4000 series CMOS.
Pinouts are seen from above AND below
(just what you need for designing or fault finding)
Plus Truth Tables and/or written explanations of the method of operation.
(Does NOT contain technical DC characteristics [such as rise and fall times] )
|
